3 U Controller Enclosure Supported by OceanStor 5600 V3&5800 V3
1 Overall structure of a controller enclosure
2 Front view of a controller enclosure
NOTE:
* After opening the controller panel latch, you will see that each controller contains three fan modules.
* BBU slots are numbered from left to right. BBUs of 5600 V3 are inserted into slots 0 and 3, and those of 5800 V3 are inserted into slots 0, 1, and 3. The other slots are vacant (filler panels are installed for these slots).
* The information plate records device information.
3 Rear view of a controller enclosure
The slots for interface modules of a 3 U controller enclosure are B0, B1, B2, B3, B4, B5, B6, B7, A7, A6, A5, A4, A3, A2, A1, and A0 from left to right. Among the slots, A0 to A7 are slots for the interface modules of controller A and B0 to B7 are slots for the interface modules of controller B.
NOTE:
A controller enclosure provides the following interface modules. You can configure them based on service needs.
* Slots A0 and B0 accommodate back-end ports and only allow 12 Gbit/s SAS expansion modules.
* A6, A7, B6, and B7 are slots for front-end interface modules and do not support 12 Gbit/s SAS expansion modules.
* When the storage device requires IP Scale-out, SmartIO interface modules must be installed in A3 and B3 slots for the IP Scale-out.
* Management module (mandatory): used for management and maintenance
* 12 Gbit/s SAS expansion module (mandatory): used for connecting disk enclosures
* Interface modules (optional but at least one type required): used for connecting application servers
* When the maintenance network port is used for management and maintenance, the maintenance network port can only be used by Huawei technical support for emergency maintenance and cannot be connected to the same network with the management network port. Otherwise, a network loopback may occur, causing a network storm. The initial value for the IP address of the maintenance network port is 172.31.128.101 or 172.31.128.102. The default subnet mask is 255.255.0.0. You are advised to only connect the management network port to the network.
Below OceanStor 5600 V3 accessories can provide by Hong Telecom Equipment Service Ltd :
5600V3-64G-AC 02350BSB 5600V3-64G-AC : 5600 V3 (3U, dual control, AC, 64GB, SPE62C0300)
5600V3-128G-AC 02359805 5600V3-128G-AC : 5600 V3 (3U, dual control, AC, 128GB, SPE62C0300)
LIC-5600V3-VIR 88032KNM LIC-5600V3-VIR : Intelligent heterogeneous virtualization licensing
LIC-5600V3-SNAP 88032KNN LIC-5600V3-SNAP : Snapshot license
LIC-5600V3-COPY 88032KNP LIC-5600V3-COPY : LUN copy license
LIC-5600V3-CLON 88032KNQ LIC-5600V3-CLON : Cloning license
LIC-5600V3-REP 88032KNR LIC-5600V3-REP : Remote Copy Licenses
LIC-5600V3-TIER 88032KNT LIC-5600V3-TIER : Intelligent data classification
LIC-5600V3-QOS 88032KNV LIC-5600V3-QOS : Intelligent Service Quality Control
LIC-5600V3-PAR 88032KNW LIC-5600V3-PAR : Intelligent cache partition
LIC-5600V3-PATH 88032KNY LIC-5600V3-PATH : OceanStor Huawei multi-path software license
LIC-5600V3-BR 88032LHE LIC-5600V3-BR : System Reporting Software License
LIC-5600V3-BS 88032NMP LIC-5600V3-BS : Block Foundation Package Authorization (including Device Management, SmartThin, SmartMulti-tenant, SmartMigration, SmartErase, SmartMotion, Cloud Service)
LIC-5600V3-MIR 88032QAN LIC-5600V3-MIR : Volume mirroring license
LIC-5600V3-CACH 88032RFV LIC-5600V3-CACH : Smart SSD cache
LIC-5600V3-WORM 88032RFW LIC-5600V3-WORM : WORM license
LIC-5600V3-CD 88032RFX LIC-5600V3-CD : Smart Data Compression (for LUNs)
LIC-56-UPGRADE 88032UCV LIC-56-UPGRADE : Block Storage Upgrade Unified Storage Foundation Package Authorization with SmartDedupe & SmartCompression (for FS), SmartQuota, NFS, CIFS, NDMP)
LIC-56-HYPERPAK 88032UDB LIC-56-HYPERPAK : Data Protection Software Suite Licensing (including HyperSnap, HyperCopy, HyperClone, HyperMirror)
LIC-56-SMARTPAK 88032UDF LIC-56-SMARTPAK : Efficiency Enhancement Software Suite License (with SmartTier, SmartCache)
LIC-56V3-METRO 88032WXK LIC-56V3-METRO : Array Dual Live License
LIC-56V3-VAULT 88032XLY LIC-56V3-VAULT : Integrated backup license
LIC-56V3-ACCPAK 88033NGB LIC-56V3-ACCPAK : Performance Accelerator Suite licenses (including SmartTier, SmartCache, SmartQos, SmartPartition)
LIC-56V3-DRPAK 88033NGC LIC-56V3-DRPAK : Disaster Recovery Solution Suite License (including HyperSnap, HyperReplication)
LIC-56V3-METPAK 88033NGD LIC-56V3-METPAK : Dual Live Solution Suite License (including HyperMetro, HyperSnap)
LIC-56V3-VIRPAK 88033NGE LIC-56V3-VIRPAK : Consolidated Migration Solution Suite Licenses (including 2 * SmartVirtualization, HyperMirror, SmartMigration)
1 Overall structure of a controller enclosure
1 | System enclosure | 2 | BBU module |
3 | Controller | 4 | Power module |
5 | Management module | 6 | Interface module |
2 Front view of a controller enclosure
1 | BBU module | 2 | BBU module latch |
3 | BBU module latch | 4 | Controller panel latch |
5 | Information plate (with ESN) | 6 | Power indicator/Power button |
7 | Controller | 8 | Controller latch |
9 | Controller handle |
NOTE:
* After opening the controller panel latch, you will see that each controller contains three fan modules.
* BBU slots are numbered from left to right. BBUs of 5600 V3 are inserted into slots 0 and 3, and those of 5800 V3 are inserted into slots 0, 1, and 3. The other slots are vacant (filler panels are installed for these slots).
* The information plate records device information.
3 Rear view of a controller enclosure
1 | Power module handle | 2 | Power module |
3 | Power module socket | 4 | Management module |
5 | Management network port | 6 | Maintenance network port |
The management network port is used to connect to the maintenance terminal. | The maintenance network port is designed for special maintenance in emergency. |
||
7 | Serial port | 8 | Management module handle |
The serial port is used to connect to the maintenance terminal. |
|||
9 | USB port | 10 | GE electrical port |
Reserved function | The GE electrical port is used to connect to the GE electrical port of the application server. |
||
11 | 10 Gbit/s TOE port | 12 | 10 Gbit/s FCoE port |
The 10 Gbit/s TOE port is used to connect to the 10 Gbit/s TOE port of the application server. | The 10 Gbit/s FCoE port is used to connect to the 10 Gbit/s FCoE port of the application server. |
||
13 | 16 Gbit/s Fibre Channel port | 14 | 8 Gbit/s Fibre Channel port |
The 16 Gbit/s Fibre Channel port is used to connect to the 16 Gbit/s Fibre Channel port of the application server. | The 8 Gbit/s Fibre Channel port is used to connect to the 8 Gbit/s Fibre Channel port of the application server. |
||
15 | Mini SAS HD expansion port | ||
The mini SAS HD expansion port is used to connect to the disk enclosure. |
The slots for interface modules of a 3 U controller enclosure are B0, B1, B2, B3, B4, B5, B6, B7, A7, A6, A5, A4, A3, A2, A1, and A0 from left to right. Among the slots, A0 to A7 are slots for the interface modules of controller A and B0 to B7 are slots for the interface modules of controller B.
NOTE:
A controller enclosure provides the following interface modules. You can configure them based on service needs.
* Slots A0 and B0 accommodate back-end ports and only allow 12 Gbit/s SAS expansion modules.
* A6, A7, B6, and B7 are slots for front-end interface modules and do not support 12 Gbit/s SAS expansion modules.
* When the storage device requires IP Scale-out, SmartIO interface modules must be installed in A3 and B3 slots for the IP Scale-out.
* Management module (mandatory): used for management and maintenance
* 12 Gbit/s SAS expansion module (mandatory): used for connecting disk enclosures
* Interface modules (optional but at least one type required): used for connecting application servers
* When the maintenance network port is used for management and maintenance, the maintenance network port can only be used by Huawei technical support for emergency maintenance and cannot be connected to the same network with the management network port. Otherwise, a network loopback may occur, causing a network storm. The initial value for the IP address of the maintenance network port is 172.31.128.101 or 172.31.128.102. The default subnet mask is 255.255.0.0. You are advised to only connect the management network port to the network.
Below OceanStor 5600 V3 accessories can provide by Hong Telecom Equipment Service Ltd :
5600V3-64G-AC 02350BSB 5600V3-64G-AC : 5600 V3 (3U, dual control, AC, 64GB, SPE62C0300)
5600V3-128G-AC 02359805 5600V3-128G-AC : 5600 V3 (3U, dual control, AC, 128GB, SPE62C0300)
LIC-5600V3-VIR 88032KNM LIC-5600V3-VIR : Intelligent heterogeneous virtualization licensing
LIC-5600V3-SNAP 88032KNN LIC-5600V3-SNAP : Snapshot license
LIC-5600V3-COPY 88032KNP LIC-5600V3-COPY : LUN copy license
LIC-5600V3-CLON 88032KNQ LIC-5600V3-CLON : Cloning license
LIC-5600V3-REP 88032KNR LIC-5600V3-REP : Remote Copy Licenses
LIC-5600V3-TIER 88032KNT LIC-5600V3-TIER : Intelligent data classification
LIC-5600V3-QOS 88032KNV LIC-5600V3-QOS : Intelligent Service Quality Control
LIC-5600V3-PAR 88032KNW LIC-5600V3-PAR : Intelligent cache partition
LIC-5600V3-PATH 88032KNY LIC-5600V3-PATH : OceanStor Huawei multi-path software license
LIC-5600V3-BR 88032LHE LIC-5600V3-BR : System Reporting Software License
LIC-5600V3-BS 88032NMP LIC-5600V3-BS : Block Foundation Package Authorization (including Device Management, SmartThin, SmartMulti-tenant, SmartMigration, SmartErase, SmartMotion, Cloud Service)
LIC-5600V3-MIR 88032QAN LIC-5600V3-MIR : Volume mirroring license
LIC-5600V3-CACH 88032RFV LIC-5600V3-CACH : Smart SSD cache
LIC-5600V3-WORM 88032RFW LIC-5600V3-WORM : WORM license
LIC-5600V3-CD 88032RFX LIC-5600V3-CD : Smart Data Compression (for LUNs)
LIC-56-UPGRADE 88032UCV LIC-56-UPGRADE : Block Storage Upgrade Unified Storage Foundation Package Authorization with SmartDedupe & SmartCompression (for FS), SmartQuota, NFS, CIFS, NDMP)
LIC-56-HYPERPAK 88032UDB LIC-56-HYPERPAK : Data Protection Software Suite Licensing (including HyperSnap, HyperCopy, HyperClone, HyperMirror)
LIC-56-SMARTPAK 88032UDF LIC-56-SMARTPAK : Efficiency Enhancement Software Suite License (with SmartTier, SmartCache)
LIC-56V3-METRO 88032WXK LIC-56V3-METRO : Array Dual Live License
LIC-56V3-VAULT 88032XLY LIC-56V3-VAULT : Integrated backup license
LIC-56V3-ACCPAK 88033NGB LIC-56V3-ACCPAK : Performance Accelerator Suite licenses (including SmartTier, SmartCache, SmartQos, SmartPartition)
LIC-56V3-DRPAK 88033NGC LIC-56V3-DRPAK : Disaster Recovery Solution Suite License (including HyperSnap, HyperReplication)
LIC-56V3-METPAK 88033NGD LIC-56V3-METPAK : Dual Live Solution Suite License (including HyperMetro, HyperSnap)
LIC-56V3-VIRPAK 88033NGE LIC-56V3-VIRPAK : Consolidated Migration Solution Suite Licenses (including 2 * SmartVirtualization, HyperMirror, SmartMigration)
Comments
Post a Comment