Huawei OptiX RTN 900 series IP microwave systems
Build faster, more-reliable radio transmission links supporting multiple services
1) Ultra-large bandwidth — Utilizing high modulation schemes, cross-polarization interference cancellation, and Ethernet frame header compression technologies; offer 2 Gbit/s capacity per channel
2) Carrier-grade reliability — Protection and redundancy at the network, link, and equipment levels; Ingress Protection (IP65) for water and dust, and 8 kA surge protection for high-availability operation in harsh environments
3) Easy maintenance — Unified NMS with Optics and Routers for seamless end-to-end networking, supports TP-Assist features for flexible and cost-effective O&M
4) Enhanced security – Support AES 128/256 air link encryption and device anti-theft functions
Features as below :
The ODU is the outdoor unit for the OptiX RTN 900. It converts frequencies and amplifies signals.
The OptiX RTN 900 product series can use the RTN 600 ODU and RTN XMC ODU, covering the entire frequency band from 6 GHz to 42 GHz.
RTN XMC ODUs that the OptiX RTN 950A supports
| Item | Description | ||
| High-Power ODU | Low Capacity ODU | ||
| ODU type | XMC-2 | XMC-2H | XMC-1 |
| Frequency band | 6/7/8/10/10.5/11/13/15/18/23 /26/28/32/38/42 GHz | 6/7/8/11 GHz | 7/8/11/13/15/18/23 GHz |
| Microwave modulation scheme | QPSK/16QAM/32QAM/64QAM/ 128QAM/256QAM/512QAM/ 1024QAM(6/10/10.5/11/13/15/ 18/23/26/28/32/38/42 GHz, 7/8 GHz XMC-2E) | QPSK/16QAM/32QAM/ 64QAM/128QAM/256QAM/ 512QAM/ 1024QAM | QPSK/16QAM |
| QPSK/16QAM/32QAM/64QAM/ 128QAM/256QAM(7/8 GHz Normal) |
|||
| Channel spacing | 3.5/7/14/28/40/50/56 MHz | 7/14/28/40/50/56 MHz | 3.5/7/14/28 MHz |
| NOTE: | |||
| The 10.5 GHz frequency band does not support 40/50/56 MHz channel spacing. |
|||
RTN 600 ODUs that the OptiX RTN 950A supports
| Item | Description | |
| High-Power ODU | Standard Power ODU | |
| ODU type | HP, HPA | SP, SPA |
| Frequency band | 6/7/8/10/10.5/11/13/15/18/ 23/26/28/32/38 GHz (HP) | 7/8/11/13/15/18/23/26/38 GHz (SP ODU) |
| 6/7/8/11/13/15/18/23 GHz (HPA) | 6/7/8/11/13/15/18/23 GHz (SPA ODU) |
|
| Microwave modulation scheme | QPSK/16QAM/32QAM/64QAM/ 128QAM/256QAM | QPSK/16QAM/32QAM/ 64QAM/128QAM/256QAM |
| Channel spacing | 7/14/28/40/56 MHz (6/7/8/10/11/13 /15/18/23/26/28/32/38 GHz) | 3.5/7/14/28 MHz |
| 7/14/28 MHz (10.5 GHz) |
Some ODUs ( XMC-2E) with their Part number for reference :
ODU 6GHz A / Part Number: 52413276 / 52413277 - 10 pairs ( high/low)
ODU 6GHz B / Part Number: 52413278 / 52413279 - 10 pairs ( high/low)
ODU 6GHz C / Part Number: 52413280 / 52413281 - 10 pairs ( high/low)
ODU 7GHz B / Part Number: 52413369 / 52413370 - 10 pairs ( high/low)
ODU 7GHz C / Part Number: 52413367 / 52413368 - 10 pairs ( high/low)
ODU 8GHz A / Part Number: 52413321 / 52413322 - 10 pairs ( high/low)
ODU 8GHz B / Part Number: 52413323 / 52413324 - 10 pairs ( high/low)
There are two methods for mounting the ODU and the antenna: direct mounting and separate mounting.
The direct mounting method is generally adopted when a small- or medium-diameter and single-polarized antenna is used. In this situation, if one ODU is configured for one antenna, the ODU is directly mounted at the back of the antenna. If two ODUs are configured for one antenna, an RF signal combiner/splitter (hence referred to as a hybrid coupler) must be mounted to connect the ODUs to the antenna.( Figure 2 ) illustrates the direct mounting method.
The direct mounting method can also be adopted when a small- or medium-diameter and dual-polarized antenna is used. Two ODUs are mounted onto an antenna using an orthomode transducer (OMT). The method for installing an OMT is similar to that for installing a hybrid coupler.
The separate mounting method is adopted when a large- or medium-diameter and single- or dual-polarized antenna is used. (Figure 3 )shows the separate mounting method. In this situation, a hybrid coupler can be mounted (two ODUs share one feed boom).
HongTelecom Equipment Service LTD have big stock of RTN950A ( IDU+ODU+Antenna )
Comments
Post a Comment