- Supports 8 full-width compute nodes or 16 half-width compute nodes for flexible slot configuration.
- Supports a compute node with 2 CPUs and 24 DIMMs or 2 x (2 CPUs + 8 DIMMs) in a half-width slot.
- Supports a compute node with 4 CPUs and 48 DIMMs in a full-width slot.
- Supports the computing density of 64 CPUs/1408 cores per chassis.
- Supports a maximum memory capacity of 24 TB per chassis.
- Supports the maximum switching capability (throughput) of 32 Tbit/s for midplane.
- Provides 4 switch modules (2 pairs), supporting Ethernet, fiber channel (FC), fiber channel over Ethernet (FCoE), InfiniBand switching and I/O ports.
NOTE:
The E9000A chassis does not support IB switch modules: CX610, CX611 and CX620.
- Each chassis is configured with two management modules in active/standby mode. They support active/standby switchover, hot swap, and the protocols of Intelligent Platform Management Interface 2.0 (IPMI 2.0), Simple Network Management Protocol (SNMP) v3, SNMP Trap v1, SNMP Trap v2c, SNMP Trap v3, Secure Sockets Layer (SSL), Secure Shell (SSH), Secure File Transfer Protocol (SFTP), Hypertext Transfer Protocol Secure (HTTPS), Network Time Protocol (NTP), Domain Name Service (DNS), Lightweight Directory Access Protocol (LDAP), and Simple Mail Transfer Protocol (SMTP).
- A display is installed in the front lower part of the chassis. The display is used to set the basic chassis information and monitor the status of the chassis and components in the chassis.
E9000 hardware structure.
Table 1 E9000 chassis components
No. | Component | Description |
1 | Chassis | The chassis is 12 U high and provides 8 full-width or 16 half-width compute node slots at the front, and 2 management module slots, 6 PSU slots, 14 fan module slots, and 4 switch or pass-through module slots at the rear. |
2 | Compute nodes | A variety of half-width and full-width compute nodes are supported and can be flexibly selected based on service needs. |
3 | Fan modules | 14 hot-swappable fan modules are supported and divided into three zones. |
4 | Pass through or switch modules | Four pass-through or switch modules can be configured to provide external ports. |
5 | Management modules | Two management modules can be configured to manage all hardware devices in the chassis, with support for active/standby switchovers and hot-swap. |
6 | PSUs | Six hot-swappable PSUs are in N+1 or N+N redundancy mode. |
The front panel of the E9000.
1 | Half-width compute nodes | 2 | Full-width compute nodes |
3 | Chassis intelligent display | 4 | ESN label |
NOTE:
The front slots of the E9000 are divided into four zones. Half-width and full-width compute nodes cannot be inserted in the same zone.
The rear panel of the E9000.
1E, 2X, 3X, and 4E | Slots for installing switch modules and pass through modules. It is recommended that pass through modules be installed in slots 1E and 4E to facilitate cable routing. | MM1 and MM2 | Slots for installing management modules. |
PSU 1 to PSU 6 | Slots for installing PSUs. | (1) to (14) | Slots for installing fan modules. |
ESD jack | A socket for inserting the ESD wrist strap. | PGND | Ground terminal. |
Huawei Tecal E9000 blade server basic configurations:
02300749 IT1K01E9000 OSCA 12U integrated chassis module
02300742 IT1K01E9000H OSCA-H 12U high-performance integrated chassis module
03054675 IT1DSMMA0000 MM910 - Frame Management Module
03030QEJ IT0E01FAN000 OSCA fan tray
02310PTH IT1MP2KM 2000W platinum AC power supply
02310LKL IT1MPOWERM00 3000W platinum AC power supply
02310LHN IT11002K5P00 2500W server DC power supply
HP DL380 Gen9 Rack Server in UAE, Proliant 2U Rack Server in UAE, Rack Server in UAE
ReplyDeletehttps://gccgamers.com/hp-dl380.html
HP DL380 Gen9 Rack Server in UAE, Safe Shopping Multiple Payment Options Express Delivery GCC Gamers Moneyback Guarantee.
1634522355242-15