MMs (Management module ) are installed in the two upper slots on the front side of the E6000 shelf.
Two MMs are configured in 1+1 redundancy mode to support active/standby failover. In addition, MMs support the Intelligent Platform Management Interface 2.0 (IPMI 2.0), serial over local area network (SOL), keyboard, video, and mouse (KVM) over IP, and virtual media.
Two MMs are configured in 1+1 redundancy mode to support active/standby failover. In addition, MMs support the Intelligent Platform Management Interface 2.0 (IPMI 2.0), serial over local area network (SOL), keyboard, video, and mouse (KVM) over IP, and virtual media.
| Function | Description |
| Managing devices | Configures and queries device asset information. |
| Queries software and hardware versions of devices. | |
| Queries the presence information about devices. | |
| Manages power-on and power-off of devices. | |
| Manages heat dissipation of the shelf. | |
| Performs remote keyboard, video, and mouse (KVM) management. | |
| Monitoring operating status | Receives alarms reported from field replaceable units (FRUs) and performs follow-up procedures based on alarm information. |
| Generates a complete set of system security logs and provides the log query function. |
|
| Monitors the status of the hard disks installed on the server blades. | |
| Monitors the operating status of the fan modules and power supply units (PSUs). | |
| Quickly locates faults in the remote maintenance system. | |
| Providing management ports | Provides a 10/100M Base-T ETH0 management network port on the panel for debugging and maintenance. |
| Provides the command line interface (CLI). | |
| Supports the serial over local area network (SOL) for remotely operating the server blades over serial ports. |
|
| Provides the web user interface (WebUI) for ease of management, for example, setting and querying tasks. |
|
| Supports centralized account management. All accounts are stored on the Active Directory server, and authentication is directed to the server. This allows you to log in to the management system by using a domain account. |
| 1 | Handle | 2 | Spring | 3 | Ethernet port ETH0 |
| 4 | COM serial port | 5 | ACT indicator | 6 | ALM indicator |
Indicators on the MM panel
| Indicator | Meaning | Color | Description |
| ALM indicator | Alarm indicator | Red and yellow | Steady red: A critical alarm is generated. |
| Steady yellow: A major alarm is generated. | |||
| Off: No alarm is generated. | |||
| ACT indicator | Active/Standby indicator | Green | Blinking at a frequency of 4 Hz: The MM is being started. |
| Blinking at a frequency of 0.5 Hz: The MM is in the standby state. |
|||
| Steady green: The active MM is operating properly. |
After learning Tecal E6000 Management module (MM), let see other accessories below :
03021FTX BC0MESMCE600 RU120 SAS / SATA RAID card, RAID0, 1, 10, 1E, 0 Cache (LSI2308)
02310KRM BC0MESMDE601 RU220 SAS / SATA RAID card, RAID0, 1, 10, 5, 50, 512MB Cache (LSI2208)
02310QNM BC0M03ESMD RU320BC SAS / SATA RAID card, RAID0,1,10,5,50,6,60,512MB Cache (LSI2208), support for batteries and super capacitors
02310QNK BC0M03ESMJ RU320BC SAS / SATA RAID card, RAID0,1,10,5,50,6,60,1GB Cache (LSI2208), support for battery and super capacitor
02310KTJ BC0MESMDE602 RU620 SAS / SATA RAID card, RAID0,1,10,5,50,6,60,512MB Cache (LSI2208)
02310MVY BC0M02ESMG00 RU620 SAS / SATA RAID card, RAID0, 1, 10, 5, 50, 6, 60, 1GB Cache (LSI2208)
24020944 EBATTERY1 Battery - Lithium ion battery - LSIiBBU09-1.5V
06010220 ESUPCAP1 Other storage media-LSI Flash Card-2GB; TFM, Supercap and 620mm Cable; USB2.0-English
03021GBH BC0D00QGMA00 MU210 GE interface card, 2 * GE interface to the backplane
03021LTL BC0D00TGMA00 MU230 10GE interface card, 2 * 10GE interface to the backplane
98080448 BC0HFCBC1 MU220 FC interface card, PCIE 2.0 X8-10DF-F100-2, 2 * 8G FC interface to the backplane
03021GUV BC0D00QFMB00 MU221 2G FC interface card, 2 * 2G FC interface to the backplane
Comments
Post a Comment