Optical Module Type of MA5600T, MA5603T, and MA5608T Huawei GPON OLT

This text describes the types, parameters, and relation with boards of pluggable optical modules.

The devices supports optical modules with their encapsulation modes as SFP, CSFP, SFP+, XFP, and eSFP and port types as LC, SC, and RJ45 (modules with RJ45 ports are electrical modules). The picture below shows the appearance of an optical module.

Appearance of an optical module:

NOTE:
* The appearances of SFP, CSFP, and eSFP optical modules are the same.
SFP, CSFP, and eSFP optical modules use the SFP connector.
* Unlike SFP optical modules, eSFP optical modules support performance reporting.
A CSFP optical module is a multi-channel optical module. Huawei devices use two-channel CSFP optical modules.
* The SFP module with an RJ45 port is an electrical module.
* SFP+ and XFP optical modules are 10GE optical modules. The size of an SFP+ optical module is the same as that of an SFP optical module, and the size of an XFP optical module is larger than that of an SFP+ optical module.

GE Optical/Electrical Module:
One-channel Two-fiber Bi-directional GE Optical Module.
A one-channel two-fiber bi-directional GE optical module is connected to two LC optical fibers (one for transmission and the other for reception) to provide one GE channel. Table bellowing lists the specifications of one-channel two-fiber bi-directional GE optical modules.

Type	One-channel two-fiber bi-directional optical module
No.	1	2	3	4	5	6	7
Operating Wavelength	850 nm	850 nm	1310 nm	1310 nm	1310 nm	1550 nm	1550 nm
Encapsulation Type	eSFP	SFP	eSFP	eSFP	eSFP	eSFP	eSFP
Port Rate	2.13 Gbit/s 1.25 Gbit/s 1.06 Gbit/s	1.25 Gbit/s	1.25 Gbit/s	1.25 Gbit/s	1.25 Gbit/s	1.25 Gbit/s	1.25 Gbit/s
Minimum Output Optical Power	-9.50 dBm	-9.50 dBm	-9.50 dBm	-9.00 dBm	-5.00 dBm	-5.00 dBm	-2.00 dBm
Maximum Output Optical Power	-2.50 dBm	0 dBm	-3.00 dBm	-3.00 dBm	0 dBm	0 dBm	5.00 dBm
Maximum Receiver Sensitivity	-17.00 dBm	-17.00 dBm	-20.00 dBm	-20.00 dBm	-23.00 dBm	-22.00 dBm	-23.00 dBm
Optical Connector Type	LC	LC	LC	LC	LC	LC	LC
Optical Fiber Type	Multi-mode	Multi-mode	Single-mode	Single-mode	Single-mode	Single-mode	Single-mode
Reach	0.50 km	0.55 km	10.00 km	10.00 km	40.00 km	40.00 km	80.00 km
Overload Optical Power	-3.0 dBm	-3.0 dBm	-3.0 dBm	-3.0 dBm	-3.0 dBm	-3.0 dBm	-3.0 dBm
Extinction Ratio	9.0 dB	9.0 dB	9.0 dB	9.0 dB	9.0 dB	8.5 dB	9.0 dB

One-channel One-fiber Bi-directional GE Optical Module:
A one-channel one-fiber bi-directional GE optical module is connected to one LC optical fiber (for both transmission and reception) to provide one GE channel. Table bellowing lists the specifications of one-channel one-fiber bi-directional GE optical modules.

Type	One-channel one-fiber bi-directional optical module
No.	1	2	3	4	5
Operating Wavelength	Tx: 1310 nm Rx: 1490 nm	Tx: 1490 nm Rx: 1310 nm	Tx: 1310 nm Rx: 1490 nm	Tx: 1490 nm Rx: 1310 nm	Tx: 1570nm Rx: 1490nm
Encapsulation Type	eSFP	eSFP	eSFP	eSFP	eSFP
Port Rate	1.25 Gbit/s	1.25 Gbit/s	1.25 Gbit/s	1.25 Gbit/s	1.25 Gbps
Minimum Output Optical Power	-9.00 dBm	-9.00 dBm	-2.00 dBm	-2.00 dBm	-2 dBm
Maximum Output Optical Power	-3.00 dBm	-3.00 dBm	3.00 dBm	3.00 dBm	4 dBm
Maximum Receiver Sensitivity	-19.50 dBm	-19.50 dBm	-23.00 dBm	-23.00 dBm	-26 dBm
Optical Connector Type	LC	LC	LC	LC	LC
Optical Fiber Type	Single-mode	Single-mode	Single-mode	Single-mode	Single-mode
Reach	10.00 km	10.00 km	40.00 km	40.00 km	80 km
Overload Optical Power	-3.0 dBm	-3.0 dBm	-3.0 dBm	-3.0 dBm	-3 dBm
Extinction Ratio	6.0 dB	6.0 dB	9.0 dB	9.0 dB	9 dB

Two-channel One-fiber Bi-directional GE Optical Module:
A two-channel one-fiber bi-directional GE optical module is connected to two LC optical fibers (each for both transmission and reception) to provide two GE channels. Table bellowing lists the specifications of a two-channel one-fiber bi-directional GE optical module.
Specifications of a two-channel one-fiber bi-directional GE optical module:

Type	Two-channel one-fiber bi-directional optical module
Operating Wavelength	Tx: 1490 nm Rx: 1310 nm
Encapsulation Type	CSFP
Port Rate	1.25 Gbit/s
Minimum Output Optical Power	-9.00 dBm
Maximum Output Optical Power	-3.00 dBm
Maximum Receiver Sensitivity	-19.50 dBm
Optical Connector Type	LC
Optical Fiber Type	Single-mode
Reach	10.00 km
Overload Optical Power	-3.0 dBm
Extinction Ratio	6.0 dB

One-channel Two-fiber Bi-directional GE CWDM Optical Module:

Type	One-channel two-fiber bi-directional optical module
Operating Wavelength	1471 nm, 1491 nm, 1511 nm, 1531 nm, 1551 nm, 1571 nm, 1591 nm, 1611 nm
Encapsulation Type	eSFP
Port Rate	100 M ~ 2.67 Gb/s
Minimum Output Optical Power	0 dBm
Maximum Output Optical Power	-5.0 dBm
Maximum Receiver Sensitivity	-28.0 dBm
Optical Connector Type	LC
Optical Fiber Type	Single-mode
Reach	80.0 km
Overload Optical Power	-9.0 dBm
Extinction Ratio	8.5 dB

GE Electrical Module:
A GE electrical module is connected to a network cable to provide one GE channel. Table bellowing lists the specifications of a GE electrical module.

Type	1000Base-T RJ45 electrical port
Encapsulation Type	SFP
Port Rate	Full-duplex 1000 Mbit/s
Reach	100.00 m

10GE Optical Module (SFP+):
A 10GE optical module (SFP+) is connected to two LC optical fibers to provide one GE channel. Table belowing lists the specifications of 10GE optical modules (SFP+).

Type	One-channel two-fiber bi-directional optical module
No.	1	2	3
Operating Wavelength	850 nm	1310 nm	1550 nm
Encapsulation Type	SFP+	SFP+	SFP+
Port Rate	10 Gbit/s	10 Gbit/s	9.95-11.10 Gbit/s
Minimum Output Optical Power	-7.30 dBm	-8.20 dBm	-4.70 dBm
Maximum Output Optical Power	-1.00 dBm	0.50 dBm	4.00 dBm
Maximum Receiver Sensitivity	-11.10 dBm	-12.60 dBm	-14.10 dBm
Optical Connector Type	LC	LC	LC
Optical Fiber Type	Multi-mode	Single-mode	Single-mode
Reach	0.30 km	10.00 km	40.00 km
Overload Optical Power	-1.0 dBm	0.5 dBm	0.5 dBm
Extinction Ratio	3.0 dB	3.5 dB	3.5 dB

10GE Optical Module (XFP):
A 10GE optical module (XFP) is connected to two LC optical fibers to provide one GE channel. Table 4-9 lists the specifications of 10GE optical modules (XFP).

Type	One-channel two-fiber bi-directional optical module
No.	1	2	3	4
Operating Wavelength	850 nm	1310 nm	1550 nm	1550 nm
Encapsulation Type	XFP	XFP	XFP	XFP
Port Rate	10.30 Gbit/s	9.95-10.71 Gbit/s	9.95-11.10 Gbit/s	9.95-11.10 Gbit/s
Minimum Output Optical Power	-7.30 dBm	-6.00 dBm	-1.00 dBm	0 dBm
Maximum Output Optical Power	-1.30 dBm	-1.00 dBm	2.00 dBm	4.00 dBm
Maximum Receiver Sensitivity	-7.50 dBm	-11.00 dBm	-15.00 dBm	-24.00 dBm
Optical Connector Type	LC	LC	LC	LC
Optical Fiber Type	Multi-mode	Single-mode	Single-mode	Single-mode
Reach	0.30 km	10.00 km	40.00 km	80.00 km
Overload Optical Power	-1.0 dBm	0.5 dBm	-1.0 dBm	-7.0 dBm
Extinction Ratio	3.0 dB	6.0 dB	8.2 dB	9.0 dB

FE Optical Module:
This topic describes the types, parameters, and relation with boards of FE optical modules.
...
One-channel Two-fiber Bi-directional FE Optical Module
A one-channel two-fiber bi-directional FE optical module is connected to two LC optical fibers to provide one FE channel. Table belowing lists the specifications of an FE optical module.

Type	One-channel two-fiber bi-directional optical module
Operating Wavelength	Tx: 1550 nm Rx: 1310 nm
Encapsulation Type	eSFP
Port Rate	STM-1
Minimum Output Optical Power	-15.00 dBm
Maximum Output Optical Power	-8.00 dBm
Maximum Receiver Sensitivity	-32.00 dBm
Optical Connector Type	LC/PC
Optical Fiber Type	Single-mode
Reach	15.00 km
Overload Optical Power	-8.0 dBm
Extinction Ratio	8.5 dB

Two-channel One-fiber Bi-directional FE Optical Module:
A two-channel one-fiber bi-directional FE optical module is connected to two LC optical fibers to provide two FE channels. Table bellowing lists the specifications of an FE optical module.

Type	Two-channel one-fiber bi-directional optical module
Operating Wavelength	Tx: 1550 nm Rx: 1310 nm
Encapsulation Type	eSFP
Port Rate	STM-1
Minimum Output Optical Power	-15.00 dBm
Maximum Output Optical Power	-8.00 dBm
Maximum Receiver Sensitivity	-28.20 dBm
Optical Connector Type	LC
Optical Fiber Type	Single-mode
Reach	10.00 km
Overload Optical Power	-8.0 dBm
Extinction Ratio	8.2 dB

STM-1 Optical Module
This topic describes the parameters and relation with boards of STM-1 optical modules.

An STM-1 optical module is applicable to the TOPA (O2CE/CSSA) board and AIUG (O2CS) board. It is connected to two LC optical fibers to provide one STM-1 channel. Table bellowing lists specifications of STM-1 optical modules.

Type	One-channel two-fiber bi-directional optical module
No.	1	2	3	4
Operating Wavelength	1310 nm	1310 nm	1310 nm	1550 nm
Encapsulation Type	eSFP	SFP	eSFP	eSFP
Port Rate	STM-1	STM-1	STM-1	STM-1
Minimum Output Optical Power	-15.00 dBm	-19.00 dBm	-5.00 dBm	-5.00 dBm
Maximum Output Optical Power	-8.00 dBm	-14.00 dBm	0 dBm	0 dBm
Maximum Receiver Sensitivity	-31.00 dBm	-30.00 dBm	-37.00 dBm	-37.00 dBm
Optical Connector Type	LC	LC	LC	LC
Optical Fiber Type	Single-mode	Multi-mode	Single-mode	Single-mode
Reach	15.00 km	2.00 km	40.00 km	80.00 km
Overload Optical Power	-8.0 dBm	-14.0 dBm	-10.0 dBm	-10.0 dBm
Extinction Ratio	8.2 dB	10.0 dB	10.5 dB	10.5 dB

PON Optical Module:
This topic describes the types, parameters, and relation with boards of PON optical modules.
GPON Optical Module
Specifications of GPON optical modules

No.	1	2
Type	One-fiber bi-directional optical module, class B+	One-fiber bi-directional optical module, class C+
Operating Wavelength	Tx: 1490 nm Rx: 1310 nm	Tx: 1490 nm Rx: 1310 nm
Encapsulation Type	SFP	SFP
Port Rate	Tx: 2.49 Gbit/s Rx: 1.24 Gbit/s	Tx: 2.49 Gbit/s Rx: 1.24 Gbit/s
Minimum Output Optical Power	1.50 dBm	3.00 dBm
Maximum Output Optical Power	5.00 dBm	7.00 dBm
Maximum Receiver Sensitivity	-28.00 dBm	-30.00 dBm
Optical Connector Type	SC/PC	SC/PC
Optical Fiber Type	Single-mode	Single-mode
Reach	20.00 km	20.00 km
Overload Optical Power	-8.0 dBm	-12.0 dBm
Extinction Ratio	10.0 dB	8.2 dB

10G-GPON Optical Module
Specifications:

No.	1
Type	One-fiber bi-directional optical module
Operating Wavelength	Tx: 1577 nm Rx: 1270 nm
Encapsulation Type	XFP
Port Rate	Tx: 10 Gbit/s Rx: 2.49 Gbit/s
Minimum Output Optical Power	2 dBm
Maximum Output Optical Power	6 dBm
Maximum Receiver Sensitivity	-27.5 dBm
Optical Connector Type	SC/UPC
Optical Fiber Type	Single-mode
Reach	20 km
Overload Optical Power	-7 dBm
Extinction Ratio	8.2 dB

PON Upstream Optical Module
A PON upstream optical module is applicable to the P2CA board. It is connected to one SC optical fiber to provide PON upstream transmission. Table belowing lists a specifications of a PON upstream optical module.

Type	One-fiber bi-directional optical module, ONU class B+
Operating Wavelength	Tx: 1310 nm Rx: 1490 nm
Encapsulation Type	SFP
Port Rate	Tx: 1.24 Gbit/s Rx: 2.49 Gbit/s
Minimum Output Optical Power	1.50 dBm
Maximum Output Optical Power	5.00 dBm
Maximum Receiver Sensitivity	-29.00 dBm
Optical Connector Type	SC/PC
Optical Fiber Type	Single-mode
Reach	20.00 km

As a world leading Huawei networking products supplier, Hong Telecom Equipment Service LTD(HongTelecom) keeps regular stock of Huawei GPON XG-PON XGS-PON and all accessaries with very good price, also HongTelecom offers a very fast speed of goods delivery.

Contact: Ethan Kew (Mr.)
Wechat/Phone:+ 86 13544269587
Skype: Hongtelecom_ethan